|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TLP3131 TOSHIBA PHOTOCOUPLER PHOTO RELAY TLP3131 MEASUREMENT INSTRUMENTS LOGIC IC TESTERS / MEMORY TESTERS BOARD TESTERS / SCANNERS The TOSHIBA TLP3131 Mini-flat photorelay is a small-outline photorelay, suitable for surface-mount assembly. The TLP3131 consists of a GaAs infrared-emitting diode optically coupled to a photo-MOS FET and housed in a 4-pin package. The TLP3131 features low CR multiplication and especially low On-state resistance, allowing high ON-state current. Its characteristics also include low OFF-state current and low output pin capacitance, enabling it to be used in high-frequency measuring instruments. Unit: mm FEATURES * * * * * * * * 4 pin SOP (2.54SOP4) 1-Form-A Peak Off-State Voltage Trigger LED Current On-State Current On-State Resistance Output Capacitance Isolation Voltage : 20 V (MIN.) : 4 mA (MAX.) : 300 mA (MAX.) : 1.5 W (MAX.), 1.0 W (TYP.) : 12.0 pF (MAX.), 5.0 pF (TYP.) : 1500 Vrms (MIN.) JEDEC EIAJ TOSHIBA Weight: 0.1 g : 2.1 mm high, 2.54 mm pitch 11-5H1 PIN CONFIGURATION (TOP VIEW) 1 4 SCHEMATIC 1 4 2 1 : ANODE 2 : CATHODE 3 : DRAIN 4 : DRAIN 3 2 3 1 2003-7-7 TLP3131 MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC Forward Current LED Forward Current Derating (Ta > 25C) = Reverse Voltage Junction Temperature DETECTOR Off-State Output Terminal Voltage On-State Current On-State Current Derating (Ta > 25C) = Junction Temperature SYMBOL IF DIF/C VR Tj VOFF ION DION/C Tj Tstg Topr Tsol BVS RATING 50 -0.5 5 125 20 300 -3.0 125 -40~125 -20~85 260 1500 UNIT mA mA/C V C V mA mA/C C C C C Vrms Storage Temperature Range Operating Temperature Range Lead Soldering Temperature (10 s) Isolation Voltage (AC, 1 minute, R.H. < 60%) (NOTE1) = (NOTE1) : Device considered a two-terminal device : Pins 1 and, 2 shorted together, and pins 3 and 4 shorted together. CAUTION This device is sensitive to electrostatic discharge. When using this device, please ensure that all tools and equipment are earthed. RECOMMENDED OPERATING CONDITIONS CHARACTERISTIC Supply Voltage Forward Current On-State Current Operating Temperature SYMBOL VDD IF ION Topr MIN. 3/4 10 3/4 25 TYP. 3/4 3/4 3/4 3/4 MAX. 20 30 300 60 UNIT V mA mA C INDIVIDUAL ELECTRICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC Forward Voltage LED Reverse Current Capacitance DETECTOR Off-State Current Capacitance SYMBOL VF IR CT IOFF COFF TEST CONDITION IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 20 V, Ta = 50C V = 0, f = 100 MHz, t < 1 s MIN. 1.0 3/4 3/4 3/4 3/4 TYP. 1.15 3/4 15 3/4 5.0 MAX. 1.3 10 3/4 1000 12.0 UNIT V mA pF pA pF 2 2003-7-7 TLP3131 COUPLED ELECTRICAL CHARACTERISTICS (Ta = 25C) CHARACTERISTIC Trigger LED Current Return LED Current On-State Resistance SYMBOL IFT IFC RON TEST CONDITION ION = 100 mA IOFF = 10 mA ION = 100 mA, IF = 5 mA, t < 1 s MIN. 3/4 0.2 3/4 TYP. 3/4 0.75 1 MAX. 4 3/4 1.5 UNIT mA mA W ISOLATION CHARACTERISTICS (Ta = 25C) CHARACTERISTIC Capacitance Input to Output Isolation Resistance SYMBOL CS RS TEST CONDITION VS = 0 V, f = 1 MHz VS = 500 V, R.H. < 60% = AC, 1 minute Isolation Voltage BVS AC, 1 second (in oil) DC, 1 minute (in oil) MIN. 3/4 5 10 10 TYP. 0.8 10 14 MAX. 3/4 3/4 3/4 3/4 3/4 UNIT pF W Vrms Vdc 1500 3/4 3/4 3/4 3000 3000 SWITCHING CHARACTERISTICS (Ta = 25C) CHARACTERISTIC Turn-on Time Turn-off Time SYMBOL tON tOFF TEST CONDITION RL = 200 W VDD = 10 V, IF = 10 mA (NOTE 2) MIN. 3/4 3/4 TYP. 3/4 3/4 MAX. 500 500 UNIT ms (NOTE 2) : SWITCHING TIME TEST CIRCUIT IF VDD IF VOUT 2 3 10% tON tOFF VOUT 90% 1 4 RL 3 2003-7-7 TLP3131 I F Ta 100 I ON Ta 500 80 Allowable On-sate current ION (mA) (mA) 400 Allowable forward current IF 60 300 40 200 20 100 0 -20 0 20 40 60 80 100 120 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) I F VF 100 50 Ta = 25 C I ON VON 500 400 Ta = 25 C I F = 5 mA I ON (mA) On-sate current 0.8 1 1.2 1.4 1.6 1.8 I F (mA) 30 10 5 3 1 0.5 0.3 0.1 0.6 300 200 100 0 -100 -200 -300 -400 -500 -1 Forward current -0.5 0 0.5 1 Forward voltage VF (V) On-sate voltage VON (V) RON Ta 3 I ON = 300 mA I FT Ta 5 I ON = 100 mA On-sate resistance RON () I F = 5 mA t < 1s (mA) Trigger LED current I FT 20 40 60 80 100 4 t < 1s 2 3 2 1 1 0 -20 0 0 -20 0 20 40 60 80 100 Ambient temperature Ta (C) Ambient temperature Ta (C) 4 2003-7-7 TLP3131 tON,tOFF I F 1000 Ta = 25 tON,tOFF Ta 400 350 300 250 200 150 100 50 0 -20 0 20 40 60 80 100 t ON t OFF VDD = 10 V, I F = 10 mA RL = 200 (s) VDD =10 V, RL = 200 Switching time tON,tOFF 300 t OFF 100 t ON 30 10 1 3 10 30 100 Forward current I F (mA) Switching time tON,tOFF (s) Ambient temperature Ta (C) I OFF Ta 15 Ta = 25 C C OFF VOFF 1 Ta = 25 (pA) I OFF 10 Output terminal capacitance COFF / COFF (0V) 0.8 0.6 Off-state current 0.4 5 0.2 0 5 10 15 20 0 10 20 30 Off-state output voltage VOFF (V) Off-state output voltage VOFF (V) 5 2003-7-7 TLP3131 RESTRICTIONS ON PRODUCT USE 020704EBC * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium (GaAs) Arsenide is a substance used in the products described in this document. GaAs dust or vapor is harmful to the human body. Do not break, cut, crushu or dissolve chemically. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 6 2003-7-7 |
Price & Availability of TLP3131 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |